Doypack Bags: These are the bags that only have a bellows at the bottom and stand upright thanks to this bellows.
Side Bellows Rear Welding Bag: These are the bags with only bellows on the sides, the welding part is made from the back of the bag and is done completely from top to bottom.
Side Gusset Quadro Bag: These are the bags with gussets only on the sides and welded from the corners of the bag. The weld part does not protrude.
Flat Bottom Bag: These are the bags that have bellows on the bottom and both sides and stand upright thanks to these bellows.
Workplace visits to determine the suitable packaging for the product and the machine in the filling & packaging processes to be carried out with the machine. (Visits are made in company with R&D engineers and if the packaging is purchased from our company, the fee is deducted from the packaging price).
Workplace visits (accompanied by an R&D engineer) to identify problems in machine or manual filling & packaging.
Laboratory analyzes to identify the characteristics of the problem packaging and the causes causing the problem.
We have contract filling and packaging services for all your non-food products to be filled/packed by machine & hand.
What is Packaging?
They are products produced from all kinds of materials that introduce the product with the information on it and inform it about its content during the transportation, protection, storage, sale and delivery of the products to the consumer.
As it can be understood from the above definition, almost every product needs packaging, and if the packaging is not chosen correctly, the results can reach health problems beyond the material damage that the product inside will be damaged, spoiled and caused.
What Should Be Considered While Choosing Packaging?
1) First of all, the packaging material should be determined according to the characteristics of the product to be put inside (air, humidity, light transmittance, etc.), and especially if the product is food, the material suitable for food should be selected.
2) The second point is the shelf life of the product. The packaging material should be determined according to how long the product will stay in the package, even if it is an estimated time.
3) Finally, how to do stuffing and packing. If manual filling & packaging is to be done, a different packaging type should be selected, and if machine filling & packaging is to be made, a different packaging type should be selected.
You can get free information from our packaging consultants about these three important points that should be considered in packaging selection.